Monday, March 6, 2017

Fujifilm X-E1 Firmware Download

Fujifilm X-E1 Firmware Download

Design - is the first thing that catches your eye. Fujifilm decided to take a risk by offering original ergonomics, unlike all other digital cameras, and it has paid off. This solution - like a breath of fresh air, so tired of these digital menus. In FujifilmH-E1 menu, of course, is also available, but you go there will very rarely, because everything is controlled by the most basic mechanical wheels, while there is nothing superfluous, that would be a hindrance.

X-E1 has a good quality display and digital peephole. Plus digital peephole is that the OLED-display high-resolution, you will see exactly what happens in the picture, this is not SLR, which constantly have to look at the results after a made shot. On mirrorless Fujifilm you can see the result before you click. When you press the shutter to the middle of the diaphragm closes to the desired value, which will be used, exhibited ISO is used to adjust exposure and white balance, which is why you'll know exactly what you will. That is why the exposure compensation wheel is useful here. Despite the fact that the X-E1 has no problems with the automatic exposure, it is sometimes difficult lighting, and you can adjust the exposure, without taking his eyes from the eyepiece. Eyepiece, among other things, with adjustable diopter.

Fujifilm X-E1 to use proprietary sensor (16 megapixels), it is unique in its design and has no optical low-pass filter, the scouring image (just like on the Nikon D800E). This is beneficial to the picture sharpness. If you have photos blurred, so you have something to not do the camera here exactly to do with it.

The crop factor of the sensor about 1.5, if someone is important, so that the size of it almost like a DX-format Nikon. Fujii said that the characteristics of the sensor allows to obtain not only extremely sharp image, but also to reduce noise at high ISO, and these are not empty words.

Noise is almost not visible even at ISO 6400, so I boldly exhibited the AUTO mode (6400) and forget about it. That's what comes to 6400:

Fujifilm X-E1 Firmware

support for :
  • Windows 
  • Mac OS

Fujifilm X-E1

How to install Firmware Fujifilm X-E1 :
  • Check the firmware version.
  • Prepare a formatted memory card.
  • Download the firmware and copy it to the card.
  • Put the memory card with the firmware in the camera and update it.

Downlaod Firmware Fujifilm X-E1 for Windows and Mac OS

X-E1 Camera Body Firmware Update Ver.2.61 Download


EmoticonEmoticon